|Schedule your inspection today!
Safety Barrier Guidelines for Home Pools
Swimming pools should always be happy places.Unfortunately, each year thousands of American families confront swimming pool tragedies,
drowning's and near-drowning's of young children. These tragedies are preventable. These are guidelines for pool barriers that can help
prevent most submersion incidents involving young children. This designed for use by owners, purchasers, and builders of residential pools,
spas, and hot tubs. These guidelines are not intended as the sole method to minimize pool drowning of young children, just helpful safety tips
for safer pools.
Each year, hundreds of young children die and thousands come close to death due to submersion in residential swimming pools. CPSC has
estimated that each year about 300 children under 5 years old drown in swimming pools. Hospital emergency room treatment is required for
more than 2,000 children under 5 years of age who were submerged in residential pools. CPSC did an extensive study of swimming pool
accidents, both fatal drowning's and near-fatal submersions, in California, Arizona and Florida, states in which home swimming pools are very
popular and in use during much of the year.
• In California, Arizona and Florida, drowning was the leading cause of accidental death in and around the home for children under the age of
• 75 percent of the children involved in swimming pool submersion or drowning accidents were between 1 and 3 years old.
• Boys between 1 and 3 years old were the most likely victims of fatal drowning's and near-fatal submersions in residential swimming pools.
• Most of the victims were being supervised by one or both parents when the swimming pool accident occurred.
• Nearly half of the child victims were last seen in the house before the pool accident occurred. In addition, 23 percent of the accident victims
were last seen on the porch or patio, or in the yard.
• This means that fully 69 percent of the children who became victims in swimming pool accidents were not expected to be in or at the pool,
but were found drowned or submerged in the water.
• 65 percent of the accidents occurred in a pool owned by the victims immediate family, and 33 percent of the accidents occurred in pools
owned by relatives or friends.
• Fewer than 2 percent of the pool accidents were a result of children trespassing on property where they didnt live or belong.
• 77 percent of the swimming pool accident victims had been missing for five minutes or less when they were found in the pool drowned or
The speed with which swimming pool drowning's and submersions can occur is a special concern: by the time a childs absence is noted, the
child may have drowned. Anyone who has cared for a toddler knows how fast young children can move. Toddlers are inquisitive and
impulsive and lack a realistic sense of danger. These behaviors, coupled with a childs ability to move quickly and unpredictably make
swimming pools particularly hazardous for households with young children.
Swimming pool drowning's of young children have another particularly insidious feature: these are silent deaths. It is unlikely that splashing or
screaming will occur to alert a parent or caregiver that a child is in trouble. The best way to reduce child drowning's in residential pools was
for pool owners to construct and maintain barriers that would prevent young children from gaining access to pools. However, there are no
substitutes for diligent supervision.
Why the Swimming Pool Guidelines Were Developed
Young child can get over a pool barrier if the barrier is too low or if the barrier has handholds or footholds for a child to use when climbing.
The guidelines recommend that the top of a pool barrier be at least 48 inches above grade, measured on the side of the barrier which faces
away from the swimming pool.
Eliminating handholds and footholds and minimizing the size of openings in a barriers construction.
For a solid barrier no indentations or protrusions should be present, other than normal construction tolerances and masonry joints. For a
barrier (fence) made up of horizontal and vertical members if the distance between the tops of the horizontal members is less than 45 inches,
the horizontal members should be on the swimming pool side of the fence. The spacing of the vertical members should not exceed 1-3/4
inches. This size is based on the foot width of a young child and is intended to reduce the potential for a child to gain a foothold. If there are
any decorative cutouts in the fence, the space within the cutouts should not exceed 1-3/4 inches.
The definition of pool includes spas and hot tubs. The swimming pool barrier guidelines therefore apply to these structures as well as to
conventional swimming pools.
How to Prevent a Child from Getting OVER a Pool Barrier
A successful pool barrier prevents a child from getting OVER, UNDER, or THROUGH and keeps the child from gaining access to the pool
except when supervising adults are present.
The Swimming Pool Barrier Guidelines
If the distance between the tops of the horizontal members is more than 45 inches, the horizontal members can be on the side of the fence
facing away from the pool. The spacing between vertical members should not exceed 4 inches. This size is based on the head breadth and
chest depth of a young child and is intended to prevent a child from passing through an opening. Again, if there are any decorative cutouts in
the fence, the space within the cutouts should not exceed 1-3/4 inches.
For a chain link fence the mesh size should not exceed 1-1/4 inches square unless slats, fastened at the top or bottom of the fence, are used
to reduce mesh openings to no more than 1-3/4 inches.
For a fence made up of diagonal members (latticework) the maximum opening in the lattice should not exceed 1-3/4 inches.
Aboveground pools should have barriers. The pool structure itself serves as a barrier or a barrier is mounted on top of the pool structure.
Then, there are two possible ways to prevent young children from climbing up into an aboveground pool. The steps or ladder can be
designed to be secured, locked or removed to prevent access, or the steps or ladder can be surrounded by a barrier such as those
described above. For any pool barrier, the maximum clearance at the bottom of the barrier should not exceed 4 inches above grade, when
the measurement is done on the side of the barrier facing away from the pool.
If an aboveground pool has a barrier on the top of the pool, the maximum vertical clearance between the top of the pool and the bottom of
the barrier should not exceed 4 inches. Preventing a child from getting through a pool barrier can be done by restricting the sizes of
openings in a barrier and by using self-closing and self-latching gates.
To prevent a young child from getting through a fence or other barrier, all openings should be small enough so that a 4-inch diameter sphere
cannot pass through. This size is based on the head breadth and chest depth of a young child.
There are two kinds of gates which might be found on a residential property. Both can play a part in the design of a swimming pool barrier.
Pedestrian Gates are the gates people walk through. Swimming pool barriers should be equipped with a gate or gates which restrict access
to the pool. A locking device should be included in the gate design. Gates should open out from the pool and should be self closing and self-
latching. If a gate is properly designed, even if the gate is not completely latched, a young child pushing on the gate in order to enter the pool
area will at least close the gate and may actually engage the latch. When the release mechanism of the self-latching device is less than 54
inches from the bottom of the gate, the release mechanism for the gate should be at least 3 inches below the top of the gate on the side
facing the pool. Placing the release mechanism at this height prevents a young child from reaching over the top of a gate and releasing the
latch. Also, the gate and barrier should have no opening greater than 1/2 inch within 18 inches of the latch release mechanism. This
prevents a young child from reaching through the gate and releasing the latch.
Other gates should be equipped with self-latching devices. The self-latching devices should be installed as described for pedestrian gates.
How to Prevent a Child from Getting UNDER / THROUGH a Pool Barrier
In many homes, doors open directly onto the pool area or onto a patio which leads to the pool. In such cases, the wall of the house is an
important part of the pool barrier, and passage through any doors in the house wall should be controlled by security measures. The
importance of controlling a young childs movement from house to pool is demonstrated by the statistics obtained during CPSCs study of pool
incidents in California, Arizona and Florida. Almost half (46 percent) of the children who became victims of pool accidents were last seen in
the house just before they were found in the pool.
All doors which give access to a swimming pool should be equipped with an audible alarm which sounds when the door and/or screen are
opened. The alarm should sound for 30 seconds or more within 7 seconds after the door is opened and should be loud, at least 85 decibels,
when measured 10 feet away from the alarm mechanism. The alarm sound should be distinct from other sounds in the house, such as the
telephone, doorbell and smoke alarm. The alarm should have an automatic reset feature. Because adults will want to pass through house
doors in the pool barrier without setting off the alarm, the alarm should have a switch that allows adults to temporarily deactivate the alarm for
up to 15 seconds. The deactivation switch could be a touch pad (keypad) or a manual switch, and should be located at least 54 inches above
the threshold of the door covered by the alarm. This height was selected based on the reaching ability of young children.
Power safety covers can be installed on pools to serve as security barriers. Power safety covers should conform to the specifications in
ASTM F 1346-91. This standard specifies safety performance requirements for pool covers to protect young children from drowning. Self-
closing doors with self-latching devices could also be used to safeguard doors which give ready access to a swimming pool.
When a pool is located completely within a house, the walls that surround the pool should be equipped to serve as pool safety barriers.
Measures recommended above where a house wall serves as part of a safety barrier also apply for all the walls surrounding an indoor pool.
General Pool Guidelines
An outdoor swimming pool, including an inground, aboveground, or onground pool, hot tub, or spa, should be provided with a barrier which
complies with the following:
1. The top of the barrier should be at least 48 inches above grade measured on the side of the barrier which faces away from the swimming
pool. The maximum vertical clearance between grade and the bottom of the barrier should be 4 inches measured on the side of the barrier
which faces away from the swimming pool. Where the top of the pool structure is above grade, such as an aboveground pool, the barrier may
be at ground level, such as the pool structure, or mounted on top of the pool structure. Where the barrier is mounted on top of the pool
structure, the maximum vertical clearance between the top of the pool structure and the bottom of the barrier should be 4 inches.
2. Openings in the barrier should not allow passage of a 4-inch diameter sphere.
3. Solid barriers, which do not have openings, such as a masonry or stone wall, should not contain indentations or protrusions except for
normal construction tolerances and tooled masonry joints.
4. Where the barrier is composed of horizontal and vertical members and the distance between the tops of the horizontal members is less
than 45 inches, the horizontal members should be located on the swimming pool side of the fence. Spacing between vertical members should
not exceed 1-3/4 inches in width. Where there are decorative cutouts, spacing within the cutouts should not
exceed 1-3/4 inches in width.
5. Where the barrier is composed of horizontal and vertical members and the distance between the tops of the horizontal members is 45
inches or more, spacing between vertical members should not exceed 4 inches. Where there are decorative cutouts, spacing within the
cutouts should not exceed 1-3/4 inches in width.
6. Maximum mesh size for chain link fences should not exceed 1-3/4 inch square unless the fence is provided with slats fastened at the top or
the bottom which reduce the openings to no more than 1-3/4 inches.
7. Where the barrier is composed of diagonal members, such as a lattice fence, the maximum opening formed by the diagonal members
should be no more than 1-3/4 inches.
8. Access gates to the pool should be equipped to accommodate a locking device. Pedestrian access gates should open outward, away from
the pool, and should be self-closing and have a self latching device. Gates other than pedestrian access gates should have a self-latching
device. Where the release mechanism of the self-latching device is located less than 54 inches from the bottom of the gate.
• The release mechanism should be located on the pool side of the gate at least 3 inches below the top of the gate.
• The gate and barrier should have no opening greater than 1/2 inch within 18 inches of the release mechanism.
9. Where a wall of a dwelling serves as part of the barrier, one of the following should apply:
• All doors with direct access to the pool through that wall should be equipped with an alarm which produces an audible warning when the
door and its screen, if present, are opened. The alarm should sound continuously for a minimum of 30 seconds within 7 seconds after the
door is opened. The alarm should have a minimum sound pressure rating of 85 dBA at 10 feet and the sound of the alarm should be
distinctive from other household sounds, such as smoke alarms, telephones, and door bells. The alarm should automatically reset under all
conditions. The alarm should be equipped with manual means, such as touchpads or switches, to temporarily deactivate the alarm for a
single opening of the door from either direction. Such deactivation should last for no more than 15 seconds. The deactivation touch pads or
switches should be located at least 54 inches above the threshold of the door.
• The pool should be equipped with a power safety cover which complies with ASTM F1346-91 listed below.
• Other means of protection, such as self-closing doors with self-latching devices, are acceptable so long as the degree of protection
afforded is not less than the protection afforded by the above.
10. Where an aboveground pool structure is used as a barrier or where the barrier is mounted on top of the pool structure, and the means of
access is a ladder or steps, then:
• The ladder to the pool or steps should be capable of being secured, locked or removed to prevent access.
• The ladder or steps should be surrounded by a barrier. When the ladder or steps are secured, locked, or removed, any opening created
should not allow the passage of a 4-inch diameter sphere.
These guidelines are intended to provide a means of protection against potential drowning's and narrowing to children under 5 years of age
by restricting access to residential swimming pools, spas, and hot tubs.
A portable spa with a safety cover which complies with ASTM F1346-91 listed below should be exempt from the guidelines presented in this
document. Swimming pools, hot tubs, and non portable spas with safety covers should not be exempt from the provisions of this document.
Fort Worth & Dallas Texas Home Inspector Providing The Very Best Home Inspections
Kent Keith, LLC